Utah Well Data › Kane County
Kane County, Utah: well depth, water level & drilling cost
✓ 810 Utah DWRi records · verified 2026-08-26
Pull every recorded well near a Kane County address — $39
How deep are wells in Kane County, Utah?
The median drilled well depth in Kane County is 202 ft, based on 680 wells with recorded depths in the state Utah DWRi database. Half of all wells fall between 114 ft and 360 ft; 90% are shallower than 600 ft. Wells drilled since 2016 have a median depth of 300 ft.
How much does it cost to drill a well in Kane County?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Kane County?
The median static water level is 90 ft below ground surface (middle half of wells: 41 ft–177 ft), from 199 measurements.
Drilled depth distribution
Who drills wells in Kane County?
Companies by number of wells drilled in this county, per the logs Utah drillers file with the Division of Water Rights.
| Driller | Wells since 2016 |
|---|---|
| SHUMWAY EXPLORATION | 22 |
| CLUFF DRILLING | 20 |
| JAY GRIMSHAW DRILLING | 16 |
| EARTH TECHNOLOGY INC. | 14 |
| GARDNER BROTHERS DRILLING | 10 |
| GRIMSHAW DRILLING | 8 |
| CANYON COUNTRY DRILLING LLC | 7 |
| CLUFF BROTHERS DRILLING | 5 |
See every driller with wells on record in Kane County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $39Free. Goes to licensed drillers working Kane County.
Method: medians computed from Utah DWRi records (Utah DWRi well logs; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.