⟁ Utah Well Data field records · 2026 survey

Utah Well Data › Morgan County › Morgan (84050)

Morgan, UT (84050): well depth, water level & drilling cost

✓ 834 Utah DWRi records · Morgan County

140 ftmedian well depth
105 ft–201 fttypical depth range
28 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Morgan (84050) address — $49

How deep are wells in and around Morgan (84050), Utah?

The median drilled well depth in and around Morgan (84050) is 140 ft, based on 763 wells with recorded depths in the state Utah DWRi database. Half fall between 105 ft and 201 ft; 90% are shallower than 310 ft.

How much does it cost to drill a well in and around Morgan (84050)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Morgan (84050)?

The median static water level is 28 ft below ground surface (middle half of wells: 19 ft–42 ft), from 287 measurements.

Drilled depth distribution

0–50 ft 42 50–100 ft 74 100–150 ft 295 150–200 ft 146 200–300 ft 115 300–400 ft 40 400–600 ft 43 600+ ft 8
Looking at a specific property in Morgan (84050)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Morgan (84050)

Free. Goes to licensed drillers working Morgan County.

Part of Morgan County well records.

Method: medians computed from Utah DWRi records (Utah DWRi well logs; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.